The Machine | Photos | 3-D Pictures | 2-D Drawings | Experiments

Drawings:
Blumlein | Charging Transmission Line| Diode| Discharging Transmission Line| Marx Bank | Pulsed Power Lab Floor Plan | Overall View of the Nevada Shocker

Blumlein:

- Base of Water Switch on Inner Electrode in Blumlein
- Blumlein Outer Electrode
- Inner Electrode in Blumlein 2
- Inner Electrode in Blumlein 3
- Inner Electrode in Blumlein
- Intermediate Electrode in Blumlein
- Tip of Water Switch on Inner Electrode in Blumlein

Back to top

Charging Transmission Line:

- Aluminum Intermediate Electrode Insulator Retainer Between Charging Transmission Line and Blumlein
- Connector to attach Blue Insulator to Intermediate Electrode in Charging Transmission Line
- Gasket Spacer Between Blue Insulator and Al Retainer in Charging Transmission Line
- Gear Turn Shaft and Assembly for Water Switch Positioning in Charging Transmission Line
- Inner Electrode in Charging Transmission Line (Marx to Blumlein)
- Insulator at Back End of Blumlein in Charging Transmission Line
- Outer Electrode to Charging Transmission Line (No Port Holes Shown)
- Turn Crank to for Positioning the Water Switch in Charging Transmission Line
- Water Switch Rod in Charging Transmission line and Blumlein
- Water Switch to Turn Crank in Charging Transmission Line

Back to top

Diode:

- Diode Assembly of Cathode with Plastic Barrier
- End Plate (Piece One) for Old Diode Vacuum Chamber - Anode
- End plate (Piece two) for Old Diode Vacuum Chamber - Anode
- Old Diode Vacuum Chamber 2 - Anode
- Old Diode Vacuum Chamber - Anode

Back to top

Discharging Transmission Line:

- Inductor between Inner and Outer Electrodes in Discharging Transmission Line
- Outer Electrode (Anode) to Discharging Transmission Line 2
- Outer Electrode (Anode) to Discharging Transmission Line
- Plastic Inner Electrode Retainer between Blumlein and Discharging Transmission Line

Back to top

Marx Bank:

- 90 deg Elbow Manifold to Capacitor in Marx Bank
- 135 deg Elbow Manifold to Capacitor Case in Marx Bank
- Capacitor 3-8 Field Shaper on Gas Manifold in Marx Bank
- Capacitor 9 Field Shaper on Gas Manifold in Marx Bank
- Capacitor to Manifold Plug in Marx Bank
- Charging Circuit for Trigitron for Marx Bank
- Electrode Retainer on the Gas Manifold in the Marx Bank
- End Cap to the Gas Manifold in Marx Bank
- End View of the Gas Manifold in Marx Bank
- Field Shaper on High Voltage End of the Gas Manifold in Marx Bank
- Gas Manifold Electrode in Marx Bank
- Marx Gap Spacing Gasket on Gas Manifold in Marx Bank
- O-Ring for Gas Manifold in Marx Bank
- Resistor Clips on Capacitors in Marx Bank
- Side View of the Gas Manifold Containing Five Electrode Holes in Marx Bank
- Side View of the Gas Manifold Containing Four Electrode Holes in Marx Bank
- Trigatron (New Design) for Gas Manifold in Marx Bank
- Trigatron for Gas Manifold in Marx Bank
- Water-Oil Barrier on Marx Bank Tank in Marx Bank

Back to top

Pulsed Power Laboratory Floor Plan:

- Conduit Between Upper (EM) Lab and Lower (Pulsed Power) Lab
- Pulsed Power Laboratory Floor Plan 1
- Pulsed Power Laboratory Floor Plan 2

Back to top

Overall View:

- Nevada Shocker Assembly Drawing 1
- Nevada Shocker Assembly Drawing 2
- Nevada Shocker Assembly Drawing 3

Back to top