logo

Nevada Shocker 2D Drawings

Home

Mission and Capabilities

People

Pulsed Power

Materials Science

Plasma Science

Sensors

Community Service

Cool Stuff

Contact Information

 

Nevada Shocker

Pulse Power Mission Statement

The Machine | Photos | 3-D Pictures | 2-D Drawings | Experiments

Drawings:
Blumlein | Charging Transmission Line| Diode| Discharging Transmission Line| Marx Bank | Pulsed Power Lab Floor Plan | Overall View of the Nevada Shocker

 

Blumlein:

- Base of Water Switch on Inner Electrode in Blumlein
- Blumlein Outer Electrode
- Inner Electrode in Blumlein 2
- Inner Electrode in Blumlein 3
- Inner Electrode in Blumlein
- Intermediate Electrode in Blumlein
- Tip of Water Switch on Inner Electrode in Blumlein

Back to top

 

Charging Transmission Line:

- Aluminum Intermediate Electrode Insulator Retainer Between Charging Transmission Line and Blumlein
- Connector to attach Blue Insulator to Intermediate Electrode in Charging Transmission Line
- Gasket Spacer Between Blue Insulator and Al Retainer in Charging Transmission Line
- Gear Turn Shaft and Assembly for Water Switch Positioning in Charging Transmission Line
- Inner Electrode in Charging Transmission Line (Marx to Blumlein)
- Insulator at Back End of Blumlein in Charging Transmission Line
- Outer Electrode to Charging Transmission Line (No Port Holes Shown)
- Turn Crank to for Positioning the Water Switch in Charging Transmission Line
- Water Switch Rod in Charging Transmission line and Blumlein
- Water Switch to Turn Crank in Charging Transmission Line

Back to top

 

Diode:

- Diode Assembly of Cathode with Plastic Barrier
- End Plate (Piece One) for Old Diode Vacuum Chamber - Anode
- End plate (Piece two) for Old Diode Vacuum Chamber - Anode
- Old Diode Vacuum Chamber 2 - Anode
- Old Diode Vacuum Chamber - Anode

Back to top

 

Discharging Transmission Line:

- Inductor between Inner and Outer Electrodes in Discharging Transmission Line
- Outer Electrode (Anode) to Discharging Transmission Line 2
- Outer Electrode (Anode) to Discharging Transmission Line
- Plastic Inner Electrode Retainer between Blumlein and Discharging Transmission Line

Back to top

 

Marx Bank:

- 90 deg Elbow Manifold to Capacitor in Marx Bank
- 135 deg Elbow Manifold to Capacitor Case in Marx Bank
- Capacitor 3-8 Field Shaper on Gas Manifold in Marx Bank
- Capacitor 9 Field Shaper on Gas Manifold in Marx Bank
- Capacitor to Manifold Plug in Marx Bank
- Charging Circuit for Trigitron for Marx Bank
- Electrode Retainer on the Gas Manifold in the Marx Bank
- End Cap to the Gas Manifold in Marx Bank
- End View of the Gas Manifold in Marx Bank
- Field Shaper on High Voltage End of the Gas Manifold in Marx Bank
- Gas Manifold Electrode in Marx Bank
- Marx Gap Spacing Gasket on Gas Manifold in Marx Bank
- O-Ring for Gas Manifold in Marx Bank
- Resistor Clips on Capacitors in Marx Bank
- Side View of the Gas Manifold Containing Five Electrode Holes in Marx Bank
- Side View of the Gas Manifold Containing Four Electrode Holes in Marx Bank
- Trigatron (New Design) for Gas Manifold in Marx Bank
- Trigatron for Gas Manifold in Marx Bank
- Water-Oil Barrier on Marx Bank Tank in Marx Bank

Back to top

 

Pulsed Power Laboratory Floor Plan:

- Conduit Between Upper (EM) Lab and Lower (Pulsed Power) Lab
- Pulsed Power Laboratory Floor Plan 1
- Pulsed Power Laboratory Floor Plan 2

Back to top

 

Overall View:

- Nevada Shocker Assembly Drawing 1
- Nevada Shocker Assembly Drawing 2
- Nevada Shocker Assembly Drawing 3

Back to top

 

Home | Mission and Capabilities | People | Pulsed Power | Materials | Plasma | Sensors | Community Service | Cool Stuff | Contact Information